Android Marshmallow Doze Settings Editor
Requires Root
This app is a simple editor of the settings or parameters which affect the operation of Doze.
If no root is available then it will offer an ADB command that will modify the doze settings.
Because there is no root on open it will always load the default settings.
Disclaimer
I accept no responsibility for any outcome that this app may cause. Use at your own risk.
Changelog - v6.0
- You can now add your own custom profiles.
- Added tuhinxp04's profile
- Bugfix - No longer crashes when device settings unavailable. Will change to non root mode.
- Bugfix - Info screen now shows default in current display type
- Bugfix - Info screen now shows location accuracy with meters
Changelog - v5.0
- New built in profiles
- Bugfix - Back arrow in settings not closing activity
Source Code
https://github.com/p0isonra1n/Doze-Settings-Editor
Parameter Descriptions
These are all direct from the Doze source code.
Inactive Timeout - inactive_to
This is the time, after becoming inactive, at which we start looking at the motion sensor to determine if the device is being left alone. We don't do this immediately after going inactive just because we don't want to be continually running the significant motion sensor whenever the screen is off.
Sensing Timeout - sensing_to
If we don't receive a callback from AnyMotion in this amount of time + locating_to, we will change from STATE_SENSING to STATE_INACTIVE, and any AnyMotion callbacks while not in STATE_SENSING will be ignored.
Locating Timeout - locating_to
This is how long we will wait to try to get a good location fix before going in to idle mode.
Location Accuracy - location_accuracy
The desired maximum accuracy (in meters) we consider the location to be good enough to go on to idle. We will be trying to get an accuracy fix at least this good or until locating_to expires.
Motion Inactive Timeout - motion_inactive_to
This is the time, after seeing motion, that we wait after becoming inactive from that until we start looking for motion again.
Idle After Inactive Timeout - idle_after_inactive_to
This is the time, after the inactive timeout elapses, that we will wait looking for significant motion until we truly consider the device to be idle.
Idle Pending Timeout - idle_pending_to
This is the initial time, after being idle, that we will allow ourself to be back in the IDLE_PENDING state allowing the system to run normally until we return to idle.
Max Idle Pending Timeout - max_idle_pending_to
Maximum pending idle timeout (time spent running) we will be allowed to use.
Idle Pending Factor - idle_pending_factor
Scaling factor to apply to current pending idle timeout each time we cycle through that state.
Idle Timeout - idle_to
This is the initial time that we want to sit in the idle state before waking up again to return to pending idle and allowing normal work to run.
Max Idle Timeout - max_idle_to
Maximum idle duration we will be allowed to use.
Idle Factor - idle_factor
Scaling factor to apply to current idle timeout each time we cycle through that state.
Min Time to Alarm - min_time_to_alarm
This is the minimum time we will allow until the next upcoming alarm for us to actually go in to idle mode.
Max Temp App Whitelist Duration - max_temp_app_whitelist_duration
Max amount of time to temporarily whitelist an app when it receives a high tickle.
MMS Temp App Whitelist Duration - mms_temp_app_whitelist_duration
Amount of time we would like to whitelist an app that is receiving an MMS.
SMS Temp App Whitelist Duration - sms_temp_app_whitelist_duration
Amount of time we would like to whitelist an app that is receiving an SMS.
These are all direct from the Doze source code.
Inactive Timeout - inactive_to
This is the time, after becoming inactive, at which we start looking at the motion sensor to determine if the device is being left alone. We don't do this immediately after going inactive just because we don't want to be continually running the significant motion sensor whenever the screen is off.
Sensing Timeout - sensing_to
If we don't receive a callback from AnyMotion in this amount of time + locating_to, we will change from STATE_SENSING to STATE_INACTIVE, and any AnyMotion callbacks while not in STATE_SENSING will be ignored.
Locating Timeout - locating_to
This is how long we will wait to try to get a good location fix before going in to idle mode.
Location Accuracy - location_accuracy
The desired maximum accuracy (in meters) we consider the location to be good enough to go on to idle. We will be trying to get an accuracy fix at least this good or until locating_to expires.
Motion Inactive Timeout - motion_inactive_to
This is the time, after seeing motion, that we wait after becoming inactive from that until we start looking for motion again.
Idle After Inactive Timeout - idle_after_inactive_to
This is the time, after the inactive timeout elapses, that we will wait looking for significant motion until we truly consider the device to be idle.
Idle Pending Timeout - idle_pending_to
This is the initial time, after being idle, that we will allow ourself to be back in the IDLE_PENDING state allowing the system to run normally until we return to idle.
Max Idle Pending Timeout - max_idle_pending_to
Maximum pending idle timeout (time spent running) we will be allowed to use.
Idle Pending Factor - idle_pending_factor
Scaling factor to apply to current pending idle timeout each time we cycle through that state.
Idle Timeout - idle_to
This is the initial time that we want to sit in the idle state before waking up again to return to pending idle and allowing normal work to run.
Max Idle Timeout - max_idle_to
Maximum idle duration we will be allowed to use.
Idle Factor - idle_factor
Scaling factor to apply to current idle timeout each time we cycle through that state.
Min Time to Alarm - min_time_to_alarm
This is the minimum time we will allow until the next upcoming alarm for us to actually go in to idle mode.
Max Temp App Whitelist Duration - max_temp_app_whitelist_duration
Max amount of time to temporarily whitelist an app when it receives a high tickle.
MMS Temp App Whitelist Duration - mms_temp_app_whitelist_duration
Amount of time we would like to whitelist an app that is receiving an MMS.
SMS Temp App Whitelist Duration - sms_temp_app_whitelist_duration
Amount of time we would like to whitelist an app that is receiving an SMS.
SCREENSHOTS
Extra Infomation
Difference: Doze and App Standby (developer.android.com)
Some tests and issues: code.google.com
CREDITS:
Thanks for reading my news about Doze Settings Editor (Android Marshmallow Only) [ROOT] at my blog Mods Firmware if you want too share this article, please put the resource, and if you think this article is very usefully dont forget to bookmark this site with CTRL + D on your keyboard to web browser.