Sp Tool DRAM Error Finally Fixed

How to fix the error? 


tecHulk
Don't worry that you bricked the phone just take a deep breath and relax a little bit, I am not gonna leave from here without fixing the error!

THE PROBLEM YOU FACED!!
you might be flashing a firmware or a wrong ROM on your device using SP tool and the moment after you formatted the whole device including the bootloader lead to a HARD BRICKED phone in your hands, with no sign of charging LED light or anything. After that when you tried to flash your stock ROM back on the device using SP TOOLS then you get the error written:
 "BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) "
this critical issue happens when the space in the device storage get wiped(EMMC storage). 


see how you gonna fix your phone yourself without going to the service provider in a few simple steps!!!!

1. MAKE SURE YOU HAVE A STOCK ORIGINAL ROM OF YOUR DEVICE & PROPER DRIVERS INSTALLED ON YOUR PC.

2. OPEN SP TOOLS.

3. BROWSE THE SCATTER FILES OF YOUR ROM AND CLICK DOWNLOAD.

4. IMMEDIATELY PRESS THE VOLUME DOWN BUTTON THEN AFTER THAT CONNECT YOUR DEVICE TO THE PC WHEN SEARCHING APPEARS ON THE SP TOOL (if not worked then do the same process but this time you press both the POWER AND VOLUME DOWN button)

5. THEN FLASH YOUR STOCK ROM GREEN CIRCLE APPEARS AND YOU ARE DONE WITH IT!!

SEE HOW SIMPLE!!!!

TIP:
* Use the latest version of the Sp tool to flash your stock Rom! If the green completion circle appears and still the device doesn't boots up then use the Sp tool version number 5.1424 to flash the device.

Note: After lots of fixing I've found out that all the devices have different ways to get flashed properly, for those who didn't fixed their phone by the following above method including the steps mentioned under the comments, please leave the details of your phone either in the comment section or in the support form I will definitely look for the solution Asap. Plus those who are having lenovo, their work is in progress for the fix. Also if you guys are finding trouble reading the comments section on your mobile, then you can change the view from portrait to landscape for better reading (enable auto rotation).

Thanks for reading my news about Sp Tool DRAM Error Finally Fixed at my blog Mods Firmware if you want too share this article, please put the resource, and if you think this article is very usefully dont forget to bookmark this site with CTRL + D on your keyboard to web browser.

New and Hot Article's :